STOP the Rubber Flubber! Use P-80® Lubricants for Appliance Assembly and Maintenance

Print

Whether you’re a design engineer, an ergonomist, or a repair and maintenance technician, you’ll come up against challenges in appliance assembly and maintenance—especially with countless rubber and soft plastic components. And you might need a specially approved H1 lubricant like P-80® IFC (for incidental food contact applications).

• Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances have rubber or soft plastic components such as O-rings, Hoses, Grommets, Seals, Pumps, Sensors, Sleeves, Drain hoses, and Intake hoses. The slip resistance of these parts makes assembly difficult.
• P-80® temporary rubber assembly lubricants significantly reduce friction, helping these parts slide easily into place. P-80® lubricants are water-based, and do not contain alcohol. Unlike petroleum-based lubricants, silicone or Vaseline, P-80® lubricants are temporary—once dry, the lubrication is gone—and compatible with elastomers, metals and most plastics. They will not crack and harden, or swell rubber. They contain no CFCs, are non-corrosive, and provide up to 70% reduction in friction. And a little goes a long way.

A Bevy of Choices

P-80® lubricants come in a broad range of formulas and sizes to meet all appliance assembly needs.

 Advantages of Using P-80® Lubricants

• Reduce force required for installation
• Increase production rates
• Reduce part breakage and rejects
• Allow for closer-fitting part design
• Reduce risk of musculoskeletal and slippage-related injuries
• Choose from a variety of ready-to-use biodegradable formulas

Please click or call us at 609-386-8770, Monday through Friday, 8:00 AM – 4:30 PM (EST)  if you have any further questions or if you’d like to test one of our products.  As always, we’re happy to provide you with free samples.

Print